ComEx Control Stations
We are offering standard as
well as customer-specific local control and
indicating units.
You have the choice between three standard
enclosures which can accomodate up to three different
control and indicating devices.
Combinations of up to three ComEx enclosures
are possible.
Either stuffing box glands in M20 x 1.5 and
M25 x 1.5 made of plastic or cable glands made
of metal are available for the electrical connection.
The plastic glands require no lock nuts.
Metal glands are screwed into a metal earth plate
sheet inside of the enclosure. Maximum amount
of cable clands: two off M20.
To ensure easier operation on site, each enclosure
can be equipped with an individual info-label.
For offshore applications special oil-resistant
attachments are available.
ComEx Control Stations 316L
ComEx 316L are stainless steel standard
enclosures for the installation of control,
signalling and display equipment. The enclosures
are certified for use in zones 1 and 2 as well as
zones 21 and 22.
The equipment is highly corrosion resistant due
to high quality stainless steel 316L (1.4404).
Either plastic or metal glands are used for
electrical connection.
On request, BARTEC equips enclosures with
control, signalling and display equipment and
cable glands. BARTEC supplies the labels
requested.
Control Switch, complete device 4 pole
This control switch has been designed to solve the variety of problems encountered in chemical
and petrochemical plants and on explosionproofed
electrical machinery in zones 1 and 2 and
in Zone 21 and 22. Four switch contacts as
opening and closing elements in different
permutations permit a variety of functions. The
operner has a positive break operation. The switch
actuator offers latched and momentary-contact
positions with different switch positions.
The control switch is supplied in double or triple
enclosures, or in combination with other
command devices, in control units.
The actuating element can be locked with up to
max. 3 padlocks.
Control Switch Installation Module, 4 Pole
This control switch has been designed to solve
the variety of problems encountered in chemical
and petrochemical plants and on explosionproofed
electrical machinery. Four switch contacts
as opening and closing elements in different
permutations permit a variety of functions. The
opener has a positive break operation. The switch
actuator offers latched and momentary-contact
positions with different switch positions.
The control switch can be installed quickly and
directly into double or triple ComEx enclosures,
or in combination with other command devices
in control units
II 2G EEx d IIC T6 
